Rode NT USB Mini Microphone and RodeConnect Software Demo

Welcome to First Person Audio. In this video I take a look at the Rode NT-USB-Mini microphone and its associate recording software, RodeConnect. This little condenser mic has a cardioid pattern and is rugged with an all metal construction, making it a great choice for on-the-road travels and quick setup. While it’s a USB mic that can be used with any DAW, I coupled it with the RodeConnect software in this video for the purpose of demonstrating both the mic and the software that’s specifically designed for this mic. The first time you connect the Rode NT-USB-Mini mic to the Rode software, it prompts you to do a firmware upgrade on the mic. The reason it does this is to add an internal noise gate, compressor, exciter, and and low-pass filter to the mic itself, all of which can be controlled in the RodeConnect software. I paid for this mic out-of-pocket and I’m not associated with RRode in any way. Here’s some links for you:

Pixel Professional Lavalier Lapel Microphone for iPhone/iPad

Welcome to this inaugural video of the newly rebranded First Person Audio YouTube channel. This is the channel formerly known as The Audacity Bootcamp. In this video I do a short review of the Pixel Professional Lavalier Lapel Microphone for iPhone/iPad. I’m always on the lookout for a good lapel mic and when I come across one that was made for the iPhone and/or iPad, my interest was peaked.

This Pixel lavalier mic is a high quality mic with metal construction and a braided cord. I bought the one with the 9 foot cord. It actually says 9.8 feet. I demo this mic plugged into my iPhone 11. Something’s going on with my iPhone because I’m hearing a little bit of static every now and then. It isn’t coming from the mic because I can hear it on recordings with no mic attached. The quality of this mic will be very obvious once I unplug it and talk to you using the mic on my iPhone. Other than loudness leveling and cleaning up a few mouth sounds, I did no post production on the audio to give you a good sample of what it sounds like out of the box.

Here’s my affiliate link to this mic: https://amzn.to/2W0gG1e

-Mike

I’m Re-Branding The Audacity Bootcamp

It’s time for a facelift of The Audacity Bootcamp! So I’m going to give it one. I’ll be changing the name of The Audacity Bootcamp to First Person Audio over the next week to 10 days. All of the existing content will remain as well as the current subscriptions to my YouTube channel. If I do this right, you won’t have to do anything and it will be transparent to you. It will all just magically change.

This re-branding is going to affect everything currently touched by The Audacity Bootcamp with the exception of my course on Udemy. That course is going to remain as-is. The new name will impact the website, podcast, Twitter, and The Audacity Bootcamp Facebook page.

Re-branding like this will allow me more freedom to touch on other topics in my videos and podcasts, while keeping Audacity as a core element to what I do. Once the changes are made, it’ll be back to business as usual.

Rode NT1 and Audio-Technica AT2020USB+ Side-by-Side Comparison

In this video I do a short comparison of the Rode NT1 and the Audio-Technica AT2020USB+ condenser mics. Both of these mics are excellent and the differences in sound and quality are small. So I advise using headphones or earbuds to hear the difference. I refer to the shock mount I use on my AT2020USB+ and the pop filter as 2 different items I purchased but they’re part of the same package. See the link below.

Here’s what I discovered after doing this test. 1) The AT2020USB+ has more of an upper end presence and slightly more bass. This is reflected in the frequency response curve for the mic. 2) The Rode NT1 has a flatter frequency response curve and that resulted in slightly more clarity than the AT2020USB+ overall. But these differences are slight. If you’re looking for a good condenser mic for podcasting or voiceover/audiobook narration, either one of these mics is a good choice that will be easy on your pocketbook.

The shock mount I mention in this video will set you back about $12 and does fit the ElectroVoice RE20, among several other models. This is a great deal considering the massive shock mount offered by EV will set you back about $100. And this shock mount will hold any mic it’s designed for securely. Here are my links to the products mentioned in this video:

Rode NT1 Condenser Mic Kit https://amzn.to/2Vl4WGk

Audio-Technica AT2020USB+ Condenser Mic https://amzn.to/3lufqhg

AT2020 Shock Mount with Pop Filter https://amzn.to/3CgZSDB

This is another shock mount I own but didn’t mention in this video. If you’re looking for another good shock mount for an RE20 mic that doesn’t include the pop filter above, this may be what you’re looking for:

https://amzn.to/3yqx3lY

-Enjoy!

Rode NT1 Mic Kit Unbox and Demo

I took the plunge and bought a Rode NT1 condenser mic. I’ve had my eye on this for quite some time and I’ve been comparing the specs of both the NT1 and the NT1-A. I decided on the NT1 because of its flatter frequency response, which I’ve discovered over the years compliments my voice better. I’m also warming up to the idea of starting into audiobook narration via ACX, so I needed a good quality condenser mic. And I found it in the Rode NT1. The kit includes not only the mic but a shock mount that holds both the mic and the included pop filter.

Here’s my affiliate link to the Rode NT1 Kit: https://amzn.to/3CbcyvN

Is Audacity Spying On Us? Version 3.0.3 Is Out!

Welcome to episode 13 of the Audacity Bootcamp Podcast. I’m back from a month long road trip and while I was gone, I started hearing and reading concerns over Audacity becoming spyware under its new ownership. Also today, April 26, 2021, a new version of Audacity (3.0.3) was released. Coincidence? Let’s talk.

Here are the links I mention in this episode:

NOTE: As I was editing this episode, Audacity crashed and I was given the option to send the crash report or not send it, just as the privacy notice stated would happen.

-Mike